Invisible Care Oil 1l

You can use Invisible Oil Care to maintain all wood surfaces finished with Invisible Primer.

Result
Invisible Oil Care refreshes the old oil layer and improves protection.

Instructions
Clean the surface with a heavy-duty cleaner and wait until it has dried. The temperature of the product, room and floor should be 15 °C – 30 °C. Always ensure good ventilation during application and curing. Shake the bottle well before and during use.

• Apply a small amount of Invisible Oil Care oil to the wood using our special paint roller, which you can see below. Always treat small areas of max. 20 m2 or less.
• Gently rub the oil in with our white pads, or with cotton cloths for larger surfaces. You can use a single-disc polishing machine. Continue rubbing until the wood looks saturated and the surface is smooth.
• Remove excess oil from the surface with a cotton cloth. The wood surface must not look wet, and no oil residue should remain on the surface after rubbing.
• You can use the surface gently after 6-12 hours; it will be fully cured after approximately 3-5 days. Do not allow the surface to come into contact with water until it has fully cured. Always carry out a test piece to check that there is good adhesion between the surface and the product.

Quantity: 1l