Natural Master Oil

Suitable for all untreated (sanded) wood. Deepens the colour and structure of the wood and protects against dirt and stains. Waxing with a polishing machine is recommended.

• For all wood and floor types
• Always apply in 2 coats
• You can choose Color Oil as the 1st coat, or only 2 coats of Natura
• Works well on large floor surfaces
• Preferably applied mechanically
• Suitable for children’s toys
• It is recommended to live biologically
• Packaging: 1/2,5 litres
• Consumption: 8-12 m2 / litre

Woca Color Oil (Color Oil) gives wood floors a beautiful natural look. The colour oil can be applied directly to untreated wood in 2 coats. The oil colours penetrate deep into the wood and form a strong surface that repels dirt and water. The oil highlights the natural structure of the wood.

Colour oil is color and protection in one product. Many new color options arise in combination with pre-treatments such as lye. Colour oil enhances the wood’s color and grain. Therefore, always do a test first to see if the result is satisfactory for the type of wood being treated. Master Color Oil is applied in 2 coats.

Wipe the wood beforehand with a cloth dampened in a solution of Woca Intensive Cleaner (1:40 with water). Then let the wood dry well. Apply evenly with a brush or roller and let it sit for 20 minutes. Buff with our hand pads or single-disc polishing machine, then rub dry with cotton cloths (see everything below or here for the full range of special polishing pads for Woca oil…)

After 6-8 hours, polish the treated surface with a small amount of Master Color Oil (color or natural, whichever you prefer) to fully saturate the wood.

Consumption: 1 liter per ± 10 m²

Drying time: approx. 24 hours

Manual application:
1. Apply generously with our paint rollers or brushes. Apply the color oil evenly to a maximum of 5 m² of floor area at a time. Do not use a cheap hardware-store roller or brush, as this will not give a beautiful result.
Keep spreading the oil for 20-25 minutes so that no patchy spots form and an even, thin sheen develops everywhere. Pay extra attention to knots and other highly absorbent areas. Depending on the wood species, consumption is around 1 liter of oil per 10-15 m².
2. Then polish the oil into the wood with a green or red pad until the wood’s pores are saturated and the floor no longer absorbs oil.
3. Now rub the treated floor surface dry with our cotton cloths. During this work, you may walk on the floor. Always brush away footprints immediately.